Identificador: 2630
Abierta
Descripción
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
USADA – BUENAS CONDICONES
FISHER+RUCKLE FZX-28 Delta
Veneer crossfeed splicing machine with pre-glued veneer sheets
Veneer strip length (in fiber direction) 750 - 2800 mm
Veneer strip width (cross to fiber direction) 70 - 600 mm
Veneer strip thickness (depending on veneer) 0.3 - 1.5 mm
EC standards
Year 2001
400V/50Hz
Complete of:
- INTERMEDIATE CONVEYOR
The intermediate conveyor serves at the same time as buffer to avoid dead times during the deposit procedure.
Veneer widths (cross to fiber direction) 300 - 2000 mm-
- VENEER FACES TRIMMING AND REINFORCEMENT UNIT
- STACKING STATION
The veneers are discharged and deposited smoothly, without any mechanical load.
Veneer widths (cross to fiber direction) 300 - 2000 mm
Delivery EXW
Transport Not included
Includes loading on truck
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12134 – PRENSA CALIENTE – 5 PLATOS
PARTE: 12134 – PRENSA CALIENTE
– 5 PLATOS
USADA – EN BUENAS CONDICIONES
4' x 8'
52" x 100" x 1.750" platens
3" of daylight
500 ton capacity
120 gallon hydraulic unit with 6 hp volume pump
7 hp-3600 rpm high pressure pump
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
TALADRO MULTIPLE DOBLE
PARTE # 2TA-BR-2142B - TALADRO MULTIPLE DOBLEThe machine is standard designed and constructed for Horizontal and Vertical boring units.Each 21 horrizontal and 42 vertical drills, drill head can be adjust to any degree position for X or Y axis combination construction drill.The machine is easy to operate. Simply press the foot switch and entire horizontal and vertical boring operations can be accomplished quickly.Vertical boring for drilling at longitudinal and cross directionThe vertical boring...
AMXmachinery
FORMADORA – EXPANDE TUBOS – CAPACIDAD – 160 MM
PARTE:
3BE-CH-3001-A - FORMADORA – EXPANDE TUBOS – CAPACIDAD – 160 MM
NUEVA CON GARANTIA
Process capacity:φ50-φ160mm
Process tube length:500-3500mm
Process tube thickness:1.5-2.5mm
Process expansion tube length:20-120mm
Power: Hydraulic 15HP
W/ STANDARD ACCESSORIES AND TOOL BOX