Identificador: 2626
Abierta
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-MM-713 - BROCAS - FINGER JOINT
PARTE: 1SL-MM-713 - BROCAS - FINGER JOINTMEDIDA 41.1 MM (1-5/8")CARBURO DE TUGSTENOVASTAGO 1/2" (12.7 MM)
AMXmachinery
EXTRACTOR CENTRIFUGO - MOTOR .20 HP, 208-230V, 1 FASE
PARTE: AMX-10138 - EXTRACTOR CENTRIFUGO - MOTOR .20 HP, 208-230V,
1 FASE
USADO - BUENAS CONDICIONES
MOTOR .20 HP, 208-230V, 1 FASE,
ABIERTO
MEDIDAS: 13” ANCHO X 10-3/4” FONDO
X 12” ALTO
ENTRADA REDONDA: 7-1/4” DIAMETRO
SALIDA RECTANGULAR: 9” X 8-3/4”
AMXmachinery
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
USADA - BUENAS CONDICIONES
AMXmachinery
AFILADORA DE CUCHILLAS RECTAS – INDUSTRIAL - 1000 MM
PARTE: 4MV-PX1000 – AFILADORA DE CUCHILLAS
RECTAS – INDUSTRIAL - 1000 MM
Nueva con garantía
Technical
features:
Mini-PLC
controlling automatic downfeed, spark-out and downfeed right or left and right
Heavy
duty grinding motor 2,2 k W (3 HP) - 2800 RPM;
Tilting
head to grind hollow surfaces;
Carriage
run guides covered with replaceable hardened steel guides;
90°
rotating knife-mounting chuck;
Supplied
with stepped blocks to grind 4 overlapping planer blades s...