Identificador: 2284
Abierta
Descripción
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 12” - DAYTON
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 12” - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS MOTOR NUEVOSMedidas totales: 22” ancho x 15”
fondo x 12” altoDiámetro aspas: 12”Marca DaytonModelo: 4C659A
Motor: ¼ HP,
1725 RPM, 115/230V, 4.6/2.3 Amp, 1 faseVideo: https://vimeo.com/870515251
AMXmachinery
TALADRO MULTIPLE VERTICAL – RITTER R-46
PARTE: 12051 – TALADRO MULTIPLE VERTICAL – RITTER R-46Usada en Buenas Condiciones
AMXmachinery
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS - TRAMOS 6" LARGO
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS, CEPILLOS, CANTEADORAS - TRAMOS 6" LARGOTramos 6” largo x 2.5” ancho x 5/16” espesor - HSS10 piezas en existencia aproximadamentePara hacer las molduras para molduradora o cepillos
AMXmachinery
ENCHAPADORA
PARTE # 12C-H90 - ENCHAPADORA - HORIZONTAL - H90ENCHAPADORA PARA RECTOSPOTENCIA MAXIMA: 1100 WATTSVOLTAJE: 220VVELOCIDAD DE TRABAJO: 6 M/MINTEMPERATURA DE OPERACION: 100-250 ºC (VARIABLE)MESA: PLACA CAL. 10ADHESIVO: HOT MELTCONTROL DE TEMPERATURA: PIROMETRO ANALOGOBASTIDOR: PLACA CAL. 10TERMOSTATO: CONTROL DE ARRANQUETERMOPAR: TIPO JCORTADOR A TAMANO: MANUAL (PEDAL)ANCHO DE CHAPA: DE 9 MM A 90 MMESPESOR CHAPA: .45 MM A 3MMCHAPA A UTILIZAR: PVC, MELAMINICO, FORMAICA, MADERA, PAPELVIDEO DE LA MAQ...