Identificador: 2224
Abierta
Descripción
PARTE: 12508 - CENTRO DE MAQUINADO VERTICAL – CNC – HAAS EC-550
USADO – BUENAS CONDICIONES
2008 HAAS EC-550
FULL 4TH AXIS, 10,000 RPM SPINDLE
THRU SPINDLE COOLANT, RENISHAW PROBING
CAT 50, 72 TOOL POSITIONS
IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY
Specifications:
PALLET WIDTH 21.6"
PALLET LENGTH 21.6"
PALLET INDEXING FULL 4TH
X-AXIS TRAVEL 30"
Y-AXIS TRAVEL 34"
Z-AXIS TRAVEL 32"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 45 hp
SPINDLE TAPER CAT 50
TOOL POSITIONS (ATC) 72
Equipped With:
FULL 4TH AXIS
HIGH-PRESSURE THROUGH-SPINDLE COOLANT (1,000 PSI)
RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
72-POSITION TOOL CHANGER
10,000 RPM SPINDLE (CAT50)
CHIP CONVEYOR
REMOTE JOG HANDLE
PROGRAMMABLE COOLANT
SECOND HOME POSITION
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
QUICK CODE
MACROS
USB PORT
EARLY POWER-FAILURE DETECTION MODULE
** MACHINE RUNS (1) SHIFT A DAY
** HOURS SCREEN IN THE CONTROL HAS BEEN RESET (SEE PHOTO)
** FULL REPLACEMENT COST, AS EQUIPPED - $350,000
** MACHINE CUT PRIMARILY BRASS & SOME ALUMINUM AND STEEL
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE AVAILABLE TO BE REMOVED IN EARLY DECEMBER
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO COPIADOR CON NAVAJA TRASERA – GOODSPEED 1240A
PARTE: 12166 – TORNO COPIADOR CON NAVAJA TRASERA – GOODSPEED
1240A
USADO
– EN BUENAS CONDICIONES
CAPACIDAD LARGO: 4” – 44”
CAPACIDAD DIAMETRO: 1/2” – 4”
MOTOR PRINCIPAL: 7-1/2 HP, 3 FASES,
60 HZ, 1800-3200 RPM
MOTOR BOMBA HIDRAULICA: 3 HP
CAPACIDAD DE PRODUCCION:
4
- 7 PIEZAS/MIN PARA 24”
3 – 5 PIEZAS/MIN PARA 35”
2 – 3 PIEZAS/MIN PARA 44”
PESO CON EMPAQUE: 6700 LBS
ELECTRICOS:
208V, 3 FASES
* ENVIENOS EMAIL PARA
RECIBIR TO...
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
PARTE: 2TA-SET-106TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
Nueva con garantiaOpcionales:Extra Infeed 42” LengthTotal Enclosure CoverFeed MagazineAuto Transfer Line (4 ft x 8 ft) Transfer TableOptional Jump Shaper and Finish Shaper Cutter headsOptional Center Split Saw Station Features:• The automatic high-speed through feed device allows for
perfect finishing at speeds rangingfrom 12 ~ 52 FPM.• Suitable for mass production of woodworking factory for
processin...
AMXmachinery
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 12” - DAYTON
PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 12” - DAYTONUSADO - MUY BUENAS CONDICIONESBALEROS MOTOR NUEVOSMedidas totales: 22” ancho x 15”
fondo x 12” altoDiámetro aspas: 12”Marca DaytonModelo: 4C659A
Motor: ¼ HP,
1725 RPM, 115/230V, 4.6/2.3 Amp, 1 faseVideo: https://vimeo.com/870515251