Identificador: 2222
Abierta
Descripción
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL – CNC – HASS VF-6/50
USADO – BUENAS CONDICIONES
2015
HAAS VF-6/50 & HRT310
Type: Vertical Machining Centers
Category: Machining
Manufacturer: HAAS
Model: VF-6/50
Year: 2015
Description
HRT310 Rotary Table, 4th Axis Driving & Wiring, 8" Column Riser, Renishaw Probing, Through-Spindle Coolant, CAT50 Taper, only 1,500 Spindle Hours. This 2015 Haas VF-6/50 & HRT310 are in plant, under power and available immediately.
Specifications
TABLE LENGTH 64"
TABLE WIDTH 28"
X-AXIS TRAVEL 64"
Y-AXIS TRAVEL 32"
Z-AXIS TRAVEL 30"
SPINDLE SPEED 7,500 RPM
SPINDLE MOTOR 40 hp
SPINDLE TAPER CAT 50
TOOL CAPACITY (ATC) 30
ROTARY OR TRUNNION Yes
Equipped With
HAAS HRT310 4TH AXIS ROTARY TABLE
4TH AXIS DRIVE & WIRING
8” COLUMN RISER
RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
PROBE RISER BLOCK
THROUGH-SPINDLE COOLANT (300 PSI)
SIDE-MOUNT TOOL CHANGER (30 ATC)
AUXILARY COOLANT FILTRATION SYSTEM
PROGRAMMABLE COOLANT
REMOTE JOG HANDLE
CHIP AUGER
EARLY POWER-FAULT DETECTION MODULE
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
MACROS
USB PORT
** AS OF OCTOBER 2023, SPINDLE TIME – 1,571 HOURS
** MACHINE CUT PRIMARILY CAST IRON
** FULL REPLACEMENT COST, AS EQUIPPED - $225,000
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 43” ANCHO - TIMESAVERS
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 2 LIJAS - 43” ANCHO - TIMESAVERS
Usada - Buenas condiciones
Modelo: 2321-24-01 2Passline: 33"-38" VariableFeed Speed: 15-45 FPM1st Head: 8" Drum1st Head Motor: 25HP1st Head Speed: 5800RPM2nd Head: Combi - 5-1/2" : Platen 2-1/2:2nd Head Motor: 20HP2nd Head Speed: 4090RPMMotorized height AdjustmentInfra-red Through Beam Belt TrackingLoad Meter for each Sanding HeadDouble Infeed & Outfeed Hold-down RollsDial Indicator for Drum and Pla...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – CON VENTANA – 24.92 LITROS
PARTE:
2PG-TNFJ141 - HORNO PARA CERAMICA, VIDRIO, METALES – CON VENTANA – 24.92 LITROS
Nuevo con garantía
Temperatura Máxima 926 grados centígrados
2400 Watts, 20 Amps,
Medidas interiores: ancho 330 mm x fondo 330 mm x alto 229
mmOPCIONES:120V, 1 fase240V, 1 fase
Furniture
kitThe digital TnF-J-14-1 is
popular for heating jewelry molds. Made of ceramic fiber for fast heating and
cooling. The digital controller yields consistent quality jewelry molds. It is
a real t...
AMXmachinery
PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232
PARTE: 12526 - CENTRO
DE TRABAJO CNC - ROVER GOLD 1232
USADO - MUY BUENAS CONDICIONESNumerically
controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis)
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6
ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6
back stops of 115 mm stroke and 26 mm height spacers
...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5”
PARTE: 2ST-4DCNC - SIERRA
ESCUADRADORA VERTICAL - 4D CNC - CAP. 208” X 88” X 5” TAMANO HASTA 360” X 120”Motor 7.5 HP
NUEVA CON GARANTIASimilar to Control above, plus (except):- Base size 7’ 4” x 17’ 4” cut capacity (9’
10” cut length via CNC control); up to 10’ x 30’ capacity available- Available options include: precision panel
lifters, programmable panel pusher, automatic saw beam positioning,
scoring, EPS.X motorized stop, simple on-screen
o...