ID: 2077
Open
Description
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...
AMXmachinery
TRANSPORTADOR DE BANDA INCLINADO – 205 CM LARGO
PARTE: AMX-10070 - TRANSPORTADOR DE BANDA INCLINADO –
205 CM LARGOUSADO – MUY BUENAS CONDICIONESMEDIDAS MAQUINA: 54 CM ANCHO X 205 CM LARGO X 145 CM
ALTOMEDIDAS BANDA: 25 CM ANCHO X 404 CM LARGO13 EMPUJADORES EN TODA LA BANDAMOTOR ½ HP, 208-230/460V, 3
FASES, 60 HZ, DAYTON
CONECTADO A 230V, 3 FASES
Video: https://vimeo.com/478794190
AMXmachinery
SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
PARTE:
1TR-14355 - SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
Nueva con
garantíaEquipo convencional y tradicional: proceso simple de soldadura con
electrodo por arco eléctrico (SMAW)Doble voltaje de alimentación: 1 Fase (110 V) | 2 Fases (220 V)Rango de corriente (CA): 1 Fase (100 - 130 A) | 2 Fases (98 - 210 A)Bornes de cambio rápido: 5/16"
Corriente máxima
210 A en CA
Bornes
5/16"
Ciclo de trabajo
...
AMXmachinery
ASTILLADORA 7"
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO7" x 12" Slab Style OpeningAuto Engage Fluid CouplerDual Active RollersIntellifeedKohler Gas EngineRotor DiscAngled RotorLedger AdjustmentRapid Recovery Auto ReverseEasy Start Tension ReliefSafety / Control Bar360° Swivel Exit ChuteEasily Accessible Rotor HoodRotor Lockout Safety LeverDouble Banded V-BeltsHighway TiresElectric BrakesTorflex Suspension AxlesSignal LightsLockable Fuel / Storage CompartmentEnclosed Fu...