Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”
PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”Nueva con garantíaFeaturesStandard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞Wall thickness: 0.04〞-0.19〞Hydraulic power drive, PLC ControlBending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.Easy to operate, reasonable in composition, and l...
AMXmachinery
SIERRA TRONZADORA - PENDULO - MOTOR 7.5 HP - DISCO 22”
PARTE: 1FJ-020 - SIERRA TRONZADORA - PENDULO -
MOTOR 7.5 HP - DISCO 22”
Nueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicas
Disco 22” diámetro
Motor 7.5 HP, 220/440V, 3
fases
Medida maquina: 48"
largo x 33" ancho x 48" alto
Peso: 250 kg
-500x500.jpg)
AMXmachinery
SISTEMA FINGER JOINT - AUTOMATICO
PARTE:
2TA-SFJ-6-244-AUTO - SISTEMA FINGER JOINT - AUTOMATICONueva con
garantíaIncluye: Mesa
Entrada Motorizada, Trompo Derecho, Trompo Izquierdo, Transportador y PrensaFeatures:· Produce the
mass finger joint stocks. · The SFJ-620R
performs end trimming and shaping functions on right end of sticks. · The SFJ-620L
performs end trimming, shaping & gluing functions on left end of sticks. · The two trim
saws are fitted with one saw blad...
AMXmachinery
PARTE: 1AM-2016 - SIERRA PENDULO – MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"
PARTE: 1AM-2016 - SIERRA PENDULO –
MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"NUEVA CON GARANTIADISCO 16" DIAMETROMOTOR 5 HP, 220V, 3 FASES, 3,500 RPM2 MESAS DE TRABAJO LATERALES CON RODILLOS DE 120 CM LARGO C/U1 TOPE AJUSTABLE PARA PONER MEDIDA DE CORTE A LARGO EN CUALQUIERA DE LAS 2 MESAS LATERALESGABINETE PARA HERRAMIENTA ABAJO DE LA MESA DE 20” ANCHO X 40" FONDO X 19" ALTOCAPACIDAD DE CORTE:MAXIMO LARGO: 12”MAXIMO ALTO: 5”DANDOLE LA VUELTA AL TABLON CABE HASTA 6-1/2” DE ALTO CO...