Identificador: 2044
Abierta
PARTE: 12426 – ESPIGADORA DOBLE DE CADENA - CELACHI - DOUBLE END TENONER
AMXmachinery
Descripción
PARTE: 12426 – ESPIGADORA DOBLE DE CADENA - CELACHI - DOUBLE END TENONER
USADA - BUENAS CONDICIONES
Marca: Celachi
Útil para la fabricación de pisos de madera puertas de gabinetes, etc.
Para moldurado longitudinal Cabinas con 4 motores cada una.
Velocidad variable de alimentación mediante inversor de frecuencia.
Volts 380 50Hz.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA VERDE PARA TORNO DE 8 PIES
PARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIES
6 - MESA VERDE PARA TORNO DE 8 PIES CON 3 CAMAS DE
BANDA Y GUILLOTINA A LA SALIDA MARCA PRETINCE
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 22 LITROS
PARTE: 2PG-HOMEARTIST120 - HORNO PARA
CERAMICA, VIDRIO, METALES – 22 LITROSNuevo con garantíaThe portable Home Artist sets up in minutes. It plugs into a standard household outlet and features a collapsible luggage carrier for easy moving. Take it with you on vacation or to seminars. The Home Artist is surprisingly large for a kiln that fires up to 1900F on 120 volts.Fires rapidly up to 1900°F. It uses space-age ceramic fiber insulation, noted for energy efficiency. It is large enough to fi...
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)