Identificador: 2036
Abierta
Descripción
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONES
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.
Working dimensions:
Cross section
min./max 0.48"- 10.23" width; .25" - 3.15" thickness.
Min. part length 5.5" cut.
Length min/max 15.75"- 16'0".
Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.
Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.
Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.
Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.
Note: Machine has been dismantled and packaged by Dimter tech.
Seller indicates less than 1000 hours on the machine.
Machine available to ship immediately!
Weight: 8000 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 4” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 4” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 4” (102 mm)
AMXmachinery
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96”
PARTE:
2DO-PMC-264-1 –
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP -
MESA 30”X 96”
Nueva con garantíaMaximum Part Length:Pressure Pad Traveling Bar: 96"Pressure Pad
Traveling Bar Contact Wheel Assembly: 80" Table
size: 30" wide X 96" long Steel
table covered with ¾" x 6" pine boardsTable
weight capacity: 200 lbOne
Abrasive Belt: 6" X 264", 4750 F.P.M.Pulleys:
10" dia. X 6.252 facePressure
Pad Traveling BarHand
Held Pressure DeviceVertical
adjustment: 28"...
AMXmachinery
PARTE: 12451 - LIJADORA DE BANDA ANCHA - LOBO
PARTE: 12451 - LIJADORA DE BANDA
ANCHA - LOBO
USADA - BUENAS CONDICIONES220V, 3 FASES, 60 HZMFG: 2000Motor alimentador 1 HP,Motor principal 5 HP o 7.5 HP
AMXmachinery
SIERRA CINTA – AUTOMATICA – CAPACIDAD 10”
PARTE: HA250W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity
Round
(Diameter) 1.18"-10"
Rectangle
(W x H) 11.8" x 10"
Work
Load Capacity 3,307 lbs.
Material
Index Stroke 15.75" (Maximum 9 Times Index)
Index
Length 0.394" x 141.7"
Saw
Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade
Speed 89-295 ft./min, 60 Hz, Stepless
Saw
Blade Motor 5 HP
Hydraulic
Pump Motor 1 HP
...