Identificador: 1587
Abierta
Descripción
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO - MUY BUENAS CONDICIONES
CoAire CHSA-30
230/440V, 60 Cy, 3 Phase
Main Motor: 30 HP
Discharge Pressure: 150 PSI
Air Delivery: 100 CFM
Compressor Speed: 3050 RPM
Ambient Temperature: 32 Deg. - 115 Def. F
Driving Method: V-Belt (3VX4)
Oil Sump Capacity: 5 Gallons
Dimensions: 55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232
Filters have been replaced, its been flushed out and has new oil.
The last hours recorded on the inside panel are 35,147, they may have gone up since it was serviced last
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA – 15” ANCHO – LOBO
PARTE: 12286 – LIJADORA – 15” ANCHO – LOBO
USADA BUENAS CONDICIONES
MODELO SD-15B
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
-500x500.jpg)
AMXmachinery
SAND BLASTER - TANQUE 10 GALONES
PARTE # SIL-DC-SB10G - SAND BLASTER - TANQUE 10 GALONESPresión requerida 60-125 psi, volumen 6 a 25 CFM dependiendo de la medida de la boquillaIncluye: Pistola, ajuste de presión, 4 boquillas de cerámica .10”, .125”, .150”, .175”, manguera de 9 pies (2.7 metros)Dimensiones totales: 33-1/2” x 18-3/4” x 13”- Nuevas y originales.- 12 meses de garantía sobre defectos de fabricación.- Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales c...
4,860.00 MXN
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored