Identificador: 1554
Abierta
Descripción
PARTE: 12322 - PUNZONADORA - 30 TONS
USADA - BUENAS CONDICIONES
Tonnage capacity: 30 tons
Maximum material thickness: 1/4" mild steel
Punching capacity: 1" dia. - 1/4" mild steel
3-1/2" dia. - 12 ga. mild steel
Sheet size: 18" x 30"
Throat depth: 22"
S.P.M. approx.: 165
EQUIPPED WITH: 1-1/4" Swing-A-Way punch holder
Electric foot switch
Pushbuttons for start - stop
Selector switch for nibble - single
Large assortment of punches & dies
1 HP 1140 RPM 208/230/460/3/60 motor
Weight approx. 3000 lb
Overall dimensions approx. 65" L-R x 60" F-B x 72" H
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA 1 SIERRA 12"
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALESNueva con garantíaVariable feeding 20" to 80" to get different setup easily.Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.Max. sanding thickness 4".Min. sanding length 13".Sanding spindle 1-1/4" dia. 2 HP.Max sanding wheel 12" dia.SPECIFICATIONS Wheel, Belt Head Brush Wheel Drive Motor2 HPBrush Tilts 90° ~ 180°Sanding Belt3" x 20"Sanding Wheel Dia. Max8"Sanding Spindle D...
AMXmachinery
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFM
PARTE: 2NT-DC15SS – COLECTOR ASERRIN - 15 HP – 5000 CFMNUEVO CON GARANTIABlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"