Identificador: 1485
Abierta
Descripción
PARTE: 12281 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT 930
USADA – BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE MAKERS
PARTE: 12368 - TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE
MAKERS
NUEVO - NUNCA USADOInformation from manufacturer:For making templates for grinding
moulder knives. it have never been out of the original packing, So basically
brand new without warranty Here is the web site to the company that the machine
was purchased from a few years ago
http://www.templatemakers.com/cnc_technology/ So you can grind the moulder
knives. fully loaded machine . All the bells and whistles. revers...
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
LAMINADORA 62" RODILLOS PLANOS
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...