ID: 1539
Open
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
Description
PART: 12308 - ALPINE AUGSBURG MILL - 100 HP
USED - GOOD CONDITIONS
NO MOTORS INCLUDED, ONLY THE MILLS
Video1: https://vimeo.com/774527761
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
BOMBA DE VACIO - 7.5 HP
PARTE: 2TA-VC-DR07 – BOMBA DE VACIO – 7.5 HP - DRY ROTARY VANE(VC-DR07) Dry Rotary Vane Type Vacuum PumpSingle stage rotary vane vacuum pump are directly connected the outer covers of aluminum alloy pump with the electrical motor, for efficient and heat dissipation.The pump are advanced in stable functioning and low noise for acquiring High vacuum pressure, high water vapor toleranceDry operation for oil-less and direct drive with no belts or gears to ensure low energy consumption usageCompa...
AMXmachinery
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” - MOTOR 7.5 HP - AMX
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” -
MOTOR 7.5 HP - AMX
USADA
- MUY BUENAS CONDICIONES
CAPACIDAD DE CORTE:
ESPESOR MAXIMO: 2-1/4”
ANCHO MAXIMO: 9”
MOTOR
7.5 HP, 230/460V, 3 FASES, 60 HZ, RPM 3465
MOTOR
CONECTADO A 230V, CERRADO, US ELECTRICAL MOTORSVideo: https://vimeo.com/1057662877
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...
AMXmachinery
PARTE: 12533 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12533 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONESModelo MicronMax
oscillation length: 120mm (4.8")Max
slot depth: 80mm (3.2")Max
slot thickness: 30mm (1.2")Hourly
production: 500-800 slotsSpindle
rotation: 9,000 RPMOscillations
per min.: 60-350Max
table inclination: 20 degreesTables
19" x 9"Pneumatic
holddown on each tableSpindle
motor: 3HPOscillation
motor: 1/2HP
Current
Voltage: 220v