ID: 1955
Open
Description
PARTE: AMX-10143 - MOTOR - PARA ABANICO 30” DIAMETRO - MOTOR 120V, 3.32 AMP
USADO - BUENAS CONDICIONES
MOTOR: 120V, 60 HZ, 3.32 AMP
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
PARTE: 12417 - SIERRA INGLETERA
DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES3
HP TEFC Dual Voltage MotorsWired
for 460 Volt, 3 PhaseStart
and E-Stop buttonsLeft
head fixed, Right head manually position via hand crankMinimum
Cut Length @ 90 = 13”Maximum
cut length @ 90 = 100”Both
heads rotate inward 90 to 45 degreeBoth
heads tilt outward to 45 degree for compoundTwo
hand anti tie down cycle control on pedestalBuilt
in 3rd party hydro-checkPne...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - ELCON
PARTE: 12310 -
SIERRA ESCUADRADORA VERTICAL - ELCON
USADA - MUY BUENAS
CONDICIONES
YMFG: 2005
Voltage: 230V 60Hz 3Ph
7-1/2 HP 4,200 RPM motor; 163" horizontal cutting
capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO
digital readout with 2 meters (78.75") magnetic band installed for
horizontal positioning of the saw head; rigid welded box steel frame with (4)
vertical cutting positions; round upper guide rail with concave bearings for
smooth operation; equipped...
AMXmachinery
CABINA SAND BLASTER
PARTE: 1SIL-DC-SBC - CABINA PARA SAND BLASTER ARENADOPARTE: 1HA-0060 - CABINA PARA SAND BLASTER ARENADO - MPNueva con garantiaCapacidad de espacio interno: 300mm alto x 500 mm ancho x 800mm largo;Ventana para Inspeccion: 57mm x 260mm;Dimensiones: 1400mm alto x 870mm largo x 570mm ancho;Incluye: Pistora aspersora, 4 boquillas de ceramica, lampara interna y 1 par de guantes;Requiere: Aire comprimido y energia electrica 110V 60hz;Se recomienda utilizar compresor con tanque minimo de 100 lts y 3 HP...
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...