ID: 794
Open
Description
PARTE # 11987 – MOLDURADORA WEINIG 23 - 5 CABEZALES
5-Head
Manual setups
Central Lubrication System
Specifications
Head sequence: Bottom 7.5 KW (10hp), right & left by 11 KW(15hp) motor, top 11 KW (15 hp), bottom 7.5 KW (10hp)feed 5hp motor
1½” Spindles 6,000rpm Cutterhead
20-78 FPM Feed speed
9-1/16″ x 4-11/16″ cap
Dimensions: L 126″x W 77″x T 61″
5,500lb
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
PARTE: 2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCION
PARTE:
2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCIONNUEVA CON GARANTIACon la maquina viene incluido:(1) 7mm Nail Head(1) 10mm Nail Head(1) 12mm Nail Head(1) Single Vertical Positive Placement Clamp(1) Single Metal Pressure Plate(1) Magnetic Support for Vertical Placement
Clamp(1) Blue Rubber Pads (SW)(1) Yellow Rubber Pads (MW)(1) Black Rubber Pads (HW)(...
AMXmachinery
PARTE: 12634 - COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORIZONTAL – 30 HP
PARTE: 12634 - COMPACTADORA / EMBALADORA – PAPEL - CARTON –
HORIZONTAL – 30 HP
USADA – MUY BIENAS
CONDICIONES
Manufacturer: Balemaster
Model: 4030G-8
Serial: 09407B
HP: 30HP
Cylinder: 8"
Bale Size: 30"W x 36"H x Variable
Feed Chute: 34"x40"
Auto tie
Manufacture Year: 2009
Low bale count and running hours
Great operating condition
The conveyor and shredder are currently not
available
AMXmachinery
ROUTER DE PEDESTAL
PARTE: 12-R1200 - ROUTER DE PEDESTAL - MOTOR 5 HPMotor de 5 hp, 220V, 3 fasesVelocidad de husillo variable: De 0 a 18,000 RPMEstructura placa 3/16Mesa de fundicion 600 x 800 mmDesplazamiento de cabezal rieles de 22 mm tipo CNCBaleros de alta velocidadBanda plana de 30 mmUnidad FRLPiston neumático de 3" pulgadas de diametroAccionamiento neumaticoSpindle enfriado por aireDesplazamiento vertical de la mesaPeso 400 Kg