ID: 250
Open
Description
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALES
MOLDURADORA AUTOMATICA
5 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
3 - Joint Motor together with Right 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“
Tool arrangement BRLTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“
(with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Five feed roller shafts in standard
One driven steel rollers in the machine table
One driven roller in the out-feed table
Axial setting range of feed roller opposite the left tool holder 1 3/8”.
Extended feed roller shaft opposite the left tool holder 6”.
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 - 1/2"
Mechanical readouts on top spindle chip-breaker and pressure shoe.
5 Additional set of spacing collars, clamping length 6-11/16”,
diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles
according to US regulations
Straightening table, 6-1/2 ft
(incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Electric height adjustment of the feed
Central position of lubrication points at the front side of the machine
One interior light in the safety hood
The Illustrations in this offer can include special equipment, which do
not belong to the range of your offer.
The offer is made pursuant to our General Standard Terms and Conditions.
Safety and Noise Protection:
Electromagnetic interlocking of the safety hood (the hood may be
opened only after the spindles come to a complete stop,
(which is approximately 15 seconds with the “Smart” Spindle Brakes)
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIES
PARTE: 2TA-PT-VAC482 – PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIESNueva con garantíaSpecial design for using heating and vacuum pressure to add form or film skin to a shaped, curved or uneven surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC sheets.Automatic controlled by PLC for suitable and easy operation.Double-layer and fully sealed heat preservation.Advance heating temperature digital control by computer for the best adjustable heating speed...
AMXmachinery
FILTROS ALTA EFICIENCIA
Los filtros Standard y de Alta Eficiencia estan disenados para capturer cualquier solido mojado o particulas de liquid en una corriente de aire como son pegamentos, aceites, manchas, lacas, fibra de vidrio, epoxicos, selladores,teflon, etc.Los filtros cumplen con los requerimientos de la EPA y la capacidad de arresto de las Pinturas van desde 98.2% a 99.4% de eficiencia.FILTRO BLANCO - ALTA EFICIENCIAAN-AF923Size: 3' x 30' 1 per box / 56 per palletAN-AF123Size: 1M x 26' 1 per box / 56 ...
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
PARTE: 1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HP
PARTE:
1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HPMOTOR: 3 HP, 110/220V, 60 Hz, 1 FASESMEDIDAS DE LA MESA CON EXTENSION: 27" X 40-1/2"ALTURA MESA: 34-1/2"DIAMETRO DEL DISCO 12"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4560 RPMRANGO ELEVACION DISCO: 0 A 4"RANGO INCLINACION DISCO: 0 A 45 GRADOSCAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"PESO: 127 KGS