Identificador: 1285
Abierta
Descripción
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
USADA – BUENAS CONDICIONES – LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle) pneumatic up/down
Central adjustment of top spindle chipbreaker and pressure shoe
Central adjustment of left spindle chipbreaker and left guide
DigiSet readouts for left and top spindle
One idle roller in the outfeed table
Motorized feed beam adjustment
Centralized lubrication
Manual waxilit pump
Electronic "Smart" spindle brakes
Set up stand
(5) 120 mm dust outlets
Electrical requirements: 62 amps @ 460 volt
NO tooling included
Mfg 2006
460V, 3 PH, 60 CY
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLANTA DE TRIPLAY - 2
PLANTA DE TRIPLAY - 2
PARTE: 11719PARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”
1 - TORNO DE DESENROLLO DE 54 PULGADAS (4 PIES) SEMI-AUTOMATICO
MARCA IND. G.H. PARA DESENROLLAR TROCERIA DE 4 PIES DE LARGO Y DIAMETRO DE 25
PULG. MAXIMO GROSOR DE .08 HASTA 5.MM ACCIONADO CON CADENAS DE AVANCE Y MOTORES
DE 5,10,15 HP CON CAPACIDAD DE 30 TONELADAS DE DESENROLLO DIARIAS. PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”
2 - TORNO DE DESENROLLO DE 100 PULG (8 PIES) MARCA
...
AMXmachinery
RECUBRIMIENTO ANTI-ADHERENTE PEGAMENTO
PARTE: 2UC-BA001 - RECUBRIMIENTO ANTI-ADHERENTE
PEGAMENTO - 1 GALON
PARTE: 2UC-BA002 - RECUBRIMIENTO ANTI-ADHERENTE
PEGAMENTO - 5 GALONMATERIAL QUE SE APLICA PARA EVITAR QUE EL PEGAMENTO SECO SE PEGUE EN EL ACERO Y PARTES DE LA MAQUINA Y LA LIMPIEZA SEA FACIL Y RAPIDA
AMXmachinery
DESCORTEZADOR 27"
PARTE # 2SE-DR5-27 - DESCORTEZADORA - 27" CAPACIDADMaximum Log Diameter Barked 25”Minimum Log Length 9’Number of Debarking Tools 5Width of Debarking Tools 4”Maximum Ring Speed 133 rpmMinimum Horsepower to Operate Ring 60Maximum Log Feed Speed 221 fpmLog Feed with 15% Tool Overlap 188 fpmHydraulic Pumping Unit 10 hpAir Pressure Required 90 -100 psiMachine Weight 35,000 pounds
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...