Identificador: 617
Abierta
.jpg)
Descripción
PARTE: 2SW-LS4-36 - MESA DE TIJERA - PLATAFORMA 36" X 72"
Nuevas con garantía
Hechas en USA
Medidas y capacidad para manejar 1 bulto de MDF, Aglomerado, etc. a la vez para alimentar maquinaria para la madera,
CAPACITY: 4,000 lb. uniform load.
PLATFORM: 36" x 72" smooth plate with 4" Fork Risers.
BASE FRAME: 24" x 48" with lag plates and maintenance device.
LOWERED HEIGHT: 6-3/4"
VERTICAL TRAVEL: 36"
RAISED HEIGHT: 42-3/4"
ELEVATING TIME: 44 seconds (approx.)
LOWERING TIME: Adjustable with pressure compensated flow control.
POWER UNIT: Internally mounted with 1.0 HP TENV electric motor (includes a power cord, approx. 9' in length ) and .85 GPM hydraulic pump, valving, and reservoir filled with oil.
PRIMARY VOLTAGE: 115/1/60
CONTROL VOLTAGE: 115/1/60
CONTROL NEMA: 1 footswitch with safety cover. Includes 10 ft of straight cord.
ACTUATION: Two 3-1/2" low pressure cylinders with chrome plated rod, power up/gravity down.
BUSHINGS: All pivot points equipped with Teflon lined bushings. Leg rollers have Southworth exclusive wear indicators.
FINISH: Dark green self-priming machinery enamel with platform painted beige.
WARRANTY: Parts will be covered for two years upon receipt and approval of application information (see Southworth warranty for details).
WEIGHT: 900 lb. (approx.) - Freight class #70
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD 18”
PARTE:
12336 - CEPILLO 1 CARA - CAPACIDAD 18”
USADO - BUENAS CONDICIONES
7 1/2-HP 230 Volt 3-Phase
3 Knife Straight Cutter Head
All 5 belts have been changed
Machine has been cleaned,
sanded, primered & painted
AMXmachinery
CARROS 3 ESCUADRAS
PARTE: 1CL-0502 - CARRO DE 3 ESCUADRAS PARA ASERRADEROUso rudo reforzadaPara trozo hasta 1 metro diametro x 20 pies de largoVia-guia incluida
AMXmachinery
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERS
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERSFeatures:- A faster round louver groove mortise machine provides variable oscillating speed.- Distance between the slot is controlled by the template.- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.- Automatic pneumatic hold down clamps- Fully automatic mortise produce cycles.- Pneumatic pistons for drilling depth speed control, enable for best results.- Depth of mortising ...
AMXmachinery
ROUTER DE PEDESTAL – 10 HP – GARGANTA 29-1/2”
PARTE: 2NC-NT750-10 - ROUTER DE PEDESTAL – 10 HP – GARGANTA
29-1/2”
Nuevo con garantía
10 HP spindle drive motor
Chuck to tabletop maximum:
7-1/2"
Throat clearance: 750mm
(29-1/2'')
2 Speed Spindle: 8,100 /
16,300 RPM
Spindle travel: 95mm (3-3/4)
Depth stops: 6 position
turret stops, adjustable
Table travel: 190mm (7-1/2'')
Table surface area: 915mm x
101mm (36" x 40")
Table tilt: 45 degree front
downward tilt
Micrometric table raise:
1/32" (1mm) p...