Identificador: 2344
Abierta
.PNG)
Descripción
MESA CORRIENTE DESCENDENTE - 1 HP * 2CL-FT2200
Is ergonomic, energy efficient, and easy to maintain. Rubber anti-slip rings and removable location stops ensure the material does not move during the sanding process, and the dual filters safely trap sawdust particles. Rear suction boards and side deflector plates are removable for sanding larger surface materials. Is perfect for light to medium duty woodworking applications such as sanding and finishing.
- 84” x 24” table surface
- Perfect solution for reducing airborne wood dust and eliminating time consuming cleanups
- Two powerful 1HP motors each generating 1950 CFM
- Panels can be latched in place or folded down to make room for larger workpieces.
- Dust is collected in two drawers that can be easily removed at the front of the machine
- Designed for industrial duty applications
- For maintaining a clean and dust-free shop environment
- Virtually eliminating wood dust from the air
- Two operators can stand side-by-side while they sand workpieces on the worktable
- Heavy duty cabinet design and sturdy components provide a strong, durable work surface and investment
- Draws the contaminants down and away from the worker’s breathing zone
- Special deflectors create an even airflow across the table surface
- Simple to use; plug and play design
Main motor | 2 x 1 HP | |
Air flow CFM | 1950 CFM x 2 | |
Table load capacity | 660 lbs | |
Cartridges | 2 | |
Filter | 5 micron / 4pcs 16″ x 2″ x 1” | |
Table size | 84 x 24” | |
Sound | 82 dB | |
Table height from floor | 29 ½ to 32” | |
Machine dimensions | 84” x 28 ½” x 36” | |
Machine weight | 375 lbs. | |
Shipping dimensions | 86″ x 30″ x 36″ | |
Shipping weight | 400 lbs. | |
Electrical requirements | 230/1/60 = 8 amps | 115/1/60 = 15 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in ...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA 0.4mm & 3mm
CANTEADORA AUTOMATICA 0.4mm & 3mm PARTE: 2CK-MX370MIs designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual fu...
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 14”
PARTE: 2CK-NT-MRS14NFeatures a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with 14″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane feed chain for customer specific applications. The stable base paired with first class safety features provides industrial level ripping for softwood and hardwood lumber.MAIN MOTOR HP: 50 HPVOLTAG...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...