ID: 265
Open
Description
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"
PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"MOTOR: 4 HP, 220V, 3 FASES, 60 HZVELOCIDAD DISCO: 2,800 RPMTRANSMISION: DOBLE BANDAINCLINACION PRENSA 45 GRADOS (IZQ Y DER)DIAMETRO DEL DISCO: 16" X 1" X 1/8"DIAMETRO FLECHA: 1"PESO: 90 KGSCAPACIDAD DE CORTE:TUBO: 5" DIAMETRO X 1/4 ESPESOR PAREDANGULO: 6" X 4" X 3/8"SOLIDO: 1-1/2" DIAMETRO
AMXmachinery
PARTE: 1SL-DC-PJ3 - GATO PARA TARIMAS - CAPACIDAD 3 TONS
PARTE: 1SL-DC-PJ3 - GATO PARA
TARIMAS - CAPACIDAD 3 TONSNUEVO CON GARANTIA
AMXmachinery
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachinery
ENCHAPADORA
PARTE # 1RU-CH-BRYKO - ENCHAPADORA DE CANTOS RECTOS AUTOMATICACalderin de cola termo fusible con cubeta teflonada y termostato digital con temperatura en espera. Alimentación automática para tiras y material en rollo hasta 2mm. Rodillo presión motorizado rodillo adicional. Retestador bisierra con motor alta frecuencia. Refilador superior e inferior con copiadores y regulación mediante indicadores neumáticos. CaracterísticasAltura de trabajo min. / Máx. ...