Identificador: 265
Abierta
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
AMXmachinery
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA – 1 BANDA – SMITH
PARTE: 12275 - REASERRADORA – 1 BANDA –
SMITH
USADA – BUENAS CONDICIONES15 HP Motor1.5
HP Feed Motor
No
return included
AMXmachinery
PARTE: 2UK-PW35-F5-E - RECUBRIDORA DE MOLDURAS
PARTE: 2UK-PW35-F5-E - RECUBRIDORA DE MOLDURAS- Six meters, long steel construction bedframe, composed of 19 groups of synchronized transport wheels of 15mm width driven by a frequency inverter controlled motor (1.5 kW) with speed variation from 10 up to 47 m/min. Through an helicoil screw spindles gear transmission. STANDARD EQUIPMENT- Quick adjustable guides for profile Access ( EASY FEEDING) - Top cleaning brush, 0.37 kW motor power, rotati...
AMXmachinery
SIERRA RADIAL 4.5 HP
PARTE # SIL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HPNueva con garantiaMotor 4.5 HP, 220V, 60Hz, 3 fasesMedidas de la mesa 34-1/2” x 43-1/4”Diámetro del disco 14”Diámetro del eje 1”Máxima capacidad de corte transversal 24-3/8”Máximo espesor de corte 4-1/8”Movimiento angular del brazo 45 - 0 - 45 gradosMovimiento angular del motor 0 – 22 – 45 – 90 gradosGiro del motor 0 – 180 gradosPeso de la maquina 200 kilosTipo de empaque 1 caja
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...