Identificador: 2469
Abierta
Descripción
MAQUINA DE PASADORES
High quality drilling and dowel insertion
• Drilling from 4 sides : top, right, left, back
• 2 step machine – drilling and doweling
• Doweling from 2 sides (left and right)
• Capacity of up to 18 pcs/min
• Vertical magazine
• One-man operated
Extra:
• Side movement
• Single drop magazine
• Possibility to revers items out of the machine
• Can be integrated in a line of machines
• Waste Conveyer
- Length:
160 – 1500 mm
160 – 2200 mm - Height:
10 – 40 mm - Width:
25 – 250 mm
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
-500x500.png)
AMXmachinery1
TORNO 32 x 120''
TORNO 32 x 120'' PARTE: 2GM-GML-32120Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is supported a...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments all...
AMXmachinery1
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTRO
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTROControl Unit: TPA Control UnitX AXIS - 1100 MMY AXIS - 1300 MM
Z AXIS - 700 MM• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Reductor: Liming FE Series• Spindle Motor: ML-1C 7.5/12 24 ER32 CROSS 2+2 ENDS• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubrication System• Machine Dimension: Length: mm * Width: mm * Height:...