Identificador: 838
Abierta
Descripción
PARTE # 11904 – LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450
Good condition
Electric 230 volt, 60 cycle, 3 phase
Used to clean dust of resawn boards prior to pallet assembly.
Working dimensions: Up to 8" wide, up to 6" thick and up to 8' in length.
Infeed: Infeed belt conveyor 6" wide.
Powered brushes to clean the boards top and bottom.
Powered by 5 HP motor.
Shipping 8 (length) x 5 (width) x 5 (height)
Weight 1800 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA DESLIZABLE PARA TROMPOS
PARTE # 2BF-SK-28902 - MESA DESLIZABLE PARA TROMPOSLARGO DE VIAJE: 1250 MM (49-1/2")LARGO DEL RIEL: 1590 MM (62-1/2")
AMXmachinery
PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
PARTE: 2EN-E2410 -
COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
NUEVO CON GARANTIA• Fan 10 HP• 5,000 CFM• Total Static Pressure 8"wg• Filter Bags/Area qty/SF 24/371• Discharge 2 Bags• Variable Frequency Drive (VFD) at 10 hp and 460V• Add Pressure Transducer Kit Recommended with VFD• Vibratory Cleaning Device (VCD) with 460 V momentary
starter, Aids in filter cleaning• Fan Inlet Adapter with 4" Branch and Manual Gate• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with
F...
AMXmachinery
ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
PARTE:
12355 – ASTILLADORA - DESFIBRADORA DE PAPEL – MADERA - ETC – 72 HP
USADO EN BUENAS CONDICIONESYear:
2011 RPM:
appx. 90 Pressure:
2600 psi HP: 72 Rated
for 6000 lbs. of paper per hour No
screen,Electric:
460v, 3
phase, 60Hz, 125 AmpShredding
technology for waste made of wood, plastic or paper. The WL 15 single-shaft
shredders have proven themselves to be the classic shredders for wood waste of
all kinds, and can be found in thousands of woodworking shops all over the
...
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...