Identificador: 236
Abierta
Descripción
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHO
SPECIFICATIONS
Sanding Capacity: | Maximum Width (in): 50 (two passes) |
Dimensions (in): | 46L x 27W x 53H (on stand) |
Drum: | 5 x 25 extruded aluminum |
Drum Speed: | 1740 RPM |
Dust Hood: | 1- 4″ vacuum port, min. 600 CFM recommended |
Conveyor Motor: | 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM |
Drive Motor (TEFC): | 1-3/4 HP |
Power Requirements | 110 V 20 amp |
Shipping Weight (lbs): | 369 (3 boxes incl. stand) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 43” ANCHO - TIMESAVERS
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 2 LIJAS - 43” ANCHO - TIMESAVERS
Usada - Buenas condiciones
Modelo: 2321-24-01 2Passline: 33"-38" VariableFeed Speed: 15-45 FPM1st Head: 8" Drum1st Head Motor: 25HP1st Head Speed: 5800RPM2nd Head: Combi - 5-1/2" : Platen 2-1/2:2nd Head Motor: 20HP2nd Head Speed: 4090RPMMotorized height AdjustmentInfra-red Through Beam Belt TrackingLoad Meter for each Sanding HeadDouble Infeed & Outfeed Hold-down RollsDial Indicator for Drum and Pla...
AMXmachinery
HACHA ELECTRICA
PARTE: 2AR-63366 - HACHA ELECTRICA – CAPACIDAD MAXIMA 17” LARGO X 10” DIAMETRO – 5 TON
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHO
PARTE: 3UD-UMD8130 – LIJADORA CALIBRADORA DOBLE LADO – 1300 MM (51”) - ANCHOCOMPACTA - SUPER HEAVY DUTY MACHINENUEVA CON GARANTIAA. The machine is mainly a variety of plates were thick sanding.B. Mineral cast body with the overall structure, having sufficient rigiditybalance, greatly improving the stability of the machine work.C. Sanding large roll diameter, increasing the service life of the belt, andthe dynamic balance precisely, smooth operation.D. Feeding frequency control, speed range...