Identificador: 235
Abierta
Descripción
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHO
Sanding Capacity:
Maximum Width (in): 25
Minimum Length (in): 2-1/4, varies per application
Maximum Thickness (in): 6
Minimum Thickness (in): 1/32
Dimensions HxWxD (in): 52 x 42 x 27
Drum: 5 x 25 extruded aluminum
Drum Speed: 1740 RPM
Dust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommended
Ball bearings (1"): 4, sealed and permanently lubricated
Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely variable 0-20 FPM
Drive Motor (TEFC): 3 HP
Power Requirements: 220 V, 1 Ph
Shipping Weight (lbs): 680 (2 boxes)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
ALIMENTADOR AUTOMATICO - 1/4 HP
PARTE # SIL-DC-AF32 - ALIMENTADOR AUTOMATICO - 1/4 HPMOTOR: 1/4 HP, 220V, 60 HZ, 2 FASES4 VELOCIDADES REVERSIBLES, 6, 8, 10 Y 13 MTS/MINPUEDE TRABAJAR EN POSICION VERTICAL Y HORIZONTAL
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...
AMXmachinery
SIERRA TRONZADORA 18" DERECHA / IZQUIERDA
PARTE # 2NT-NTCS18L – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – IZQUIERDA – LEFTPARTE # 2NT-NTCS18R – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – DERECHA – RIGHT - OPCIONALNueva con garantiaFEATURESMax cutting capacity: 2" x 12", 3" x 11", 4" x 10"10HP motor, 3PH 230V with 24V magnetic controls18” 120T Carbide tipped blade with included1” Saw arbor diameterCycle operation: PneumaticTable size: 26” x 27.5”Quick access on front of the machine to adjust blade s...
AMXmachinery
ROUTER INVERTIDO ONSRUD 24210
PARTE # 10097MARCA: C.R. ONSRUDMODELO: 24210MOTOR 10HP, 3 PH, 230V, 60 HZ24” CAPACIDAD GARGANTABROCA VIAJA 0-3”PEDAL NEUMATICO