Identificador: 233
Abierta
.jpg)
.jpg)
Descripción
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHO
PARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHO
Caracteristicas:
- Easily operate with performance for sanding flat objects.
- Heavy sheet metal cabinet stand.
- Balanced cast aluminum sanding drums.
- Two different grits and level sanding drums are designed for fast and fine finish at one pass.
- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.
- Automatic feeding operates by non-slipping rubber grips conveyor.
- Raise or lower the table easily by large hand wheel.
- Three spring loaded pressure rolls keep the object flat on conveyor without sliding.
- Full power industrial motor for durability usage.
- Magnetic switch with overload protection.
- Precision sealed long life bearing.
| SPECIFICATIONS | DS-2500 | DS-3700 |
| Max. Sanding Width | 25" | 37" |
| Max. Sanding Thickness | 4" | 4" |
| Table Dimensions | 25" x 34¼" | 37" x 34¼" |
| Sanding Drum Dia. | 6" | 6" |
| Speed of Sanding Drum | 1700 RPM | 1700 RPM |
| Feeding Speed | 12 FPM | 12 FPM |
| Sanding Speed | 5 HP | 5 HP |
| Feeding Motor | ¼ HP | ¼ HP |
| N.W. | 1050 LBS | 1120 LBS |
| G.W. | 1180 LBS | 1270 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DS
PARTE: 4EL-DS - SIERRAS ESCUADRADORAS VERTICALES - ELCON
- SERIE DS
SERIE
DS-155
SERIE DS-185
SERIE
DS-215
SERIE DSL-155
SERIE DSL-185
SERIE DSL-215
SERIE DS1/2L
SERIE DS1/2L
SERIE DS1/2L
Model & Dimensions (mm)
155
185
215
Maximum
cutting length
3300
3300
4300
Maximum
cutting height - Horizontal
1505
1805
...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
PARTE:
AMX-10081 - EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
CINCINNATI FAN
MODEL: PB-9
TAG: PO:180203-1
S/N: 1801810-1,
MOTOR 1 HP, 115/208-230V
10.10/5.64 - 5.06 AMPS
1 FASE, 60 HZ
3500 RPM
ENTRADA 4" DIAMETROSALIDA 4" DIAMETRO
MEDIDAS: 15” ANCHO X 21” LARGO X 17” ALTO
6,500.00 MXN
AMXmachinery
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 3 HP (2.2 KW), 220/460V, 3
FASES
ENTRADA REDONDA: 10”
SALIDA RECTANGULAR: 4” X 6”
MEDIDAS TOTALES: 22” ANCHO X 17”
FONDO X 25” ALTO
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
PARTE:
- CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
USADO - BUENAS
CONDICIONES
Mfg: 2006
15" width capacity
6" height capacity
Helical heads
Top head 20HP
Bottom head 15HP
20-90 FPM
Motorized opening (1 HP)
460 volt 3 phase