Identificador: 224
Abierta
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12479 - TALADRO MULTIPLE - VITAP ALFA 21
PARTE: 12479 - TALADRO MULTIPLE - VITAP ALFA 21
USADO - EN BUENAS CONDICIONES
1 CABEZA INCLINABLE
27 MANDRILES
MFG. 2010
MOTORES: 230V, 3 FASES, 60 HZ
AMXmachinery
SECANTE DE MADERA - CAPACIDAD 40,000 PT
PARTE:
12297 - SECANTE DE MADERA - CAPACIDAD 40,000 PT
Usado
Completo
Caldera de Lena marca MIRGO 150 HP
AMXmachinery
ENCHAPADORA DE CANTOS HOLZ-HER 1416
PARTE: 12039 - ENCHAPADORA DE CANTOS HOLZ-HER 1416
EN BUENAS CONDICIONES
3070 HORAS DE USO
AMXmachinery
SIERRA OPTIMIZADORA
PARTE # 2OM-T2010NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2020NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2030NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONNUEVA CON GARANTIACaracteristicas:Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal.Particularly suitable for medium production requirements.The maximum feed speed of 400 FPM makes of the T 2010 NC a compact, flexible and highly productive system.The set of 5 top pre...