ID: 224
Open
Description
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE 12428 - UNIDORA DE CHAPA PARA CENTROS DE TRIPLAY
PARTE: 12428 - UNIDORA DE CHAPA PARA CENTROS
DE TRIPLAY
USADA – BUENAS CONDICIONESAncho útil de trabajo 1300mmLargo de las chapas a obtener 2500mm.Velocidad Variable de trabajo desde 10
hasta 50 ml.Espesor mínimo de unido e chapa 1mm ,
máximo 2.3mm.Unido mediante hilo y hotmelt.Año de fabricación 2019.
Voltaje 380 60 Hz
AMXmachinery
LIJADORA DE BANDA PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
PARTE: 12405-7 - LIJADORA DE BANDA
PARA TABLEROS Y LARGUEROS CURVOS DIMENSIONES DE 120 X 240 CMS MOTOR
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PARTE: 12551 - COMPRESOR DE TORNILLO - 50 HP – INGERSOLL RAND 460V
PARTE: 12551 - COMPRESOR DE TORNILLO - 50 HP – INGERSOLL
RAND 460V
USADO - BUENAS CONDICIONESIngersoll
Rand EPE50-PE-12550
HP, 3 Phase, 460V212
CFM26k
Hours
Weight:
2,500 lbs
AMXmachinery
DOBLADORA DE CORTINA - 50-20 x 79"
PARTE: 12320 - DOBLADORA DE CORTINA
- 50-20 x 79"
USADA - BUENAS CONDICIONES
Marca: Di-Acro
Modelo: Promecam 50-20 x 79"
Largo de cama: 79"