Identificador: 223
Abierta
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10130 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
PARTE: 12186 - DOBLADORA DE TUBOS CNC – HIDRAULICA - CAPACIDAD DIAMETRO 6”
PARTE: 12186 -
DOBLADORA DE TUBOS CNC – HIDRAULICA - CAPACIDAD DIAMETRO 6”
Usada – Excelentes
condiciones
Right-hand
bending rotation
Z
shift, X shift
AMXmachinery
PART: 12309 - ALPINE AUGSBURG MILL - 150 HP
PART: 12309 - ALPINE AUGSBURG MILL - 150 HP
USED - GOOD CONDITIONS
NO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774524950
Video2: https://vimeo.com/774526264
AMXmachinery
ENCHAPADORA
PARTE # 11860 - ENCHAPADORA - CEHISA EP9220V, 3 Ph, 60 Hz, 23.5 AMPALIMENTA AUTOMATICAMENTE LA CINTACORTA AL PRINCIPIO Y AL FINALPERFILA AMBOS LADOS A LO LARGOPULE AMBOS LADOS