ID: 223
Open
Description
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12309 - TRITURADORA DE MINERAL - MOLINO ALPINE AUGSBURG
PARTE: 12309 - TRITURADORA DE
MINERAL - MOLINO ALPINE AUGSBURG
USADA - BUENAS CONDICIONES
MOTOR PRINCIPAL: 20 HP
MOTOR SECUNDARIO: 20 HPVideo Maquina: https://vimeo.com/672495902
Video con Motores: https://vimeo.com/1103528276
AMXmachinery
CASETA DE PINTURA
PARTE: 12007 – CASETA DE PINTURA – 245 CM FONDO X 307 CM ANCHO - SPRAY ZONE – 2 en existenciaNuevasModelo: SZ-IOP 8 SEMarca: Spray ZoneHechas en USADimensiones: 8 pies fondo x 10 pies ancho x 8 pies alto ( 245 cm fondo x 307 cm ancho x 245 cm alto)Paneles de 18 gaMotor: 2 HP, 220V, 3 fasesAbanico: 30” diámetro a 12,500 CFMFiltración:16 filtros de fibra de vidrio2 lamparas para tubos fluorescentes
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...