Identificador: 223
Abierta
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR GASOLINA 6.5 HP
PARTE: 2AR-62323 - ASTILLADOR A GASOLINA - MOTOR 6.5 HP PREDATORNuevo con garantíaAstilla ramas hasta 3” diámetroRotor Uso Moderado a Rudo para volumenBueno para limpiar desperdicios de madera, podas, etc.Reduce el volumen del desperdicio hasta 20:1Peso: 65 kgMedidas envio: 70 cm ancho x 65 cm fondo x 85 cm alto x 80 kg pesoVideo de la maquina funcionando: Video 1
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLA
PARTE: 12056 – ESCOPLO OSCILANTE – 2 MESAS GEMELAS - HEMLAUSADA – EN BUENAS CONDICIONES
AMXmachinery
SIERRA DOBLE 45 GRADOS - CTD D45X
PARTE # AMX-10052 - SIERRA DOBLE 45 GRADOS - CTD D45XEN MUY BUENAS CONDICIONESMARCA: CTD MACHINES INCMODELO: D45X2 MOTORES: 2 HP, 115/230V, 1 FASE, RPM 34502 SIERRAS DE CORTE PARA MADERA DE 12” DIAMETROHECHA EN USA