Identificador: 1845
Abierta
.jpg)
Descripción
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDA
NUEVA EN SU CAJA ORIGINAL
Powerful
3.5 amp motor
Cast aluminum table tilts to 60° for use with belt or disc
6 in. disc for fast stock removal
Miter gauge for sanding angles on workpiece
Adjustable belt sands inside and outside curves
Reinforced steel motor housing
AC Volts: 120
Accessories Included: Miter gauge, sanding belt and sanding disc
Amperage (amps): 3.5
Belt width”: 4 in.
Diameter disk: 6 in.
Horsepower (hp): 3/4
Speed (max): 1819 RPM (disc) / 1185 SFPM (belt)
Product Weight: 27 lb.
Shipping Weight: 28.80 lb.
Table tilt (deg): 60°
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINATE SLITTER
PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010Laminate Slitter, 6" capacity- 110 Volt, 1 Ph., 1/3 HP,Standard Features:- 6" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” highOptional:- 220 Volt 50 Hz (export)
AMXmachinery
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 43” ANCHO - TIMESAVERS
PARTE: 12649 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 2 LIJAS - 43” ANCHO - TIMESAVERS
Usada - Buenas condiciones
Modelo: 2321-24-01 2Passline: 33"-38" VariableFeed Speed: 15-45 FPM1st Head: 8" Drum1st Head Motor: 25HP1st Head Speed: 5800RPM2nd Head: Combi - 5-1/2" : Platen 2-1/2:2nd Head Motor: 20HP2nd Head Speed: 4090RPMMotorized height AdjustmentInfra-red Through Beam Belt TrackingLoad Meter for each Sanding HeadDouble Infeed & Outfeed Hold-down RollsDial Indicator for Drum and Pla...
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
RENSA RADIO FRECUENCIA L&L
PARTE # 10111 - PRENSA RADIO FRECUENCIA L&LMODELO GA-84CAPACIDAD DE PEGADO 48" ANCHO X 84" LARGO X 4-1/2" ALTO10KWGENERADOR DE FRECUENCIA INCLUIDOMESA DE ALIMENTACION Y SALIDAEN BUENAS CONDICIONES DE OPERACION