Identificador: 993
Abierta
Descripción
PARTE: 12151 - LIJADORA DE CEPILLOS – SLIPCON
USADA – EN MUY BUENAS CONDICIONES
- The patented combination of rollers and rotating / oscillating discs makes
the Perfection DBB 1350 sanding machine the ideal finishing solution for entry
doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames,
furniture parts and much more.
- The sander works equally well for whitewood sanding and stain/sealer or
primer sanding. Can be used with both traditional and UV cured coatings.
- The combination of roller and rotating discs provides uniform sanding across
the entire work piece, even into profiles without loosing detail.
- Specifications: Thickness of work piece minimum 4 mm (3/16") to maximum
100 mm (3.9").
- Vacuum feed belt width 1,350mm (52") with variable speed of 10 - 40 FPM.
- (2) Top sanding roller's 400 mm dia. (15-3/4") variable speed 50 - 300
RPM.
- (4) Rotating discs, each 250 mm dia. (9-3/4");isc rotation variable 50 -
300 RPM.
- Notes from seller: Machine needs new 4" dust collection hoses and new
sanding brushes for whatever the new application will be. Everythign else was
in good running condition when removed from service
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINADORA 62" RODILLOS PLANOS
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257Pinch Roller 62" capacitySolid top and bottom rollers for flat panel laminatingSafety Gates on In-Feed and Out-FeedSolid Top and Bottom RollersFeed Rate: 50’ FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 Hz (Options Available)Air Requirement: 100 PSICrated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” highOption...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
PARTE
# 12160 – PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
USADA – MUY BUENAS CONDICIONES
Year of manufacture 2008
Opening width mm 2.800
Veneer thickness min mm 0,3
Veneer thickness max mm 1,5
Strip width min mm 50
Strip width max mm 600
Feed rate max m/min 36
Cross splicing machine Yes
Edge gluing Yes
Trimming unit Yes
Rip cut Veneer clipper
Joint Only edge gluing
Controls and software:
SIEMENS SIMATIC PANEL
CE marking Yes
Total c...
AMXmachinery
PARTE: 2CK-RAPIDEDGE-PRO – ENCHAPADORA DE CANTOS AUTOMATICA
PARTE: 2CK-RAPIDEDGE-PRO – ENCHAPADORA
DE CANTOS AUTOMATICA
NUEVO CON GARANTIAFrom
cabinet parts to cabinet doors, this Edgebander can do it all.Are
you tired of spending valuable production time adjusting your edgebander to run
various edge banding material? Do you want a professional-grade edge banding
machine that can work quickly and efficiently? Look no further than the new
Cantek RapidEdge Pro Automatic Edgebander!Our
top-of-the-line solution is designed to make edge banding a ...
AMXmachinery
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
PARTE: 12306 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant t...