Identificador: 1932
Abierta
Descripción
PARTE: 2SW-FS-80B2 - LIJADORA DE BASTONES - 2 LIJAS
NUEVA CON GARANTIA
Specifications
Sanding Belt Drive Motor: 5HP
Dust Sution Motor: 1/2HP
Sanding Belt Size: 5" X 73”
Applicable Rod Diameter: Ø5-Ø80mm
Feed Speed (Variable): 1-20m/mm
Sanding Belt Linear Speed: 1080m/mm
Net Weight: 450kgs
Gross Weight: 530kgs
Machine Dimensions (L*W*H): 1050*850*1300mm
Packing Dimensions (L*W*H): 1120*920*1520mm
Design and specifications are subject to change without prior notice.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADORA – 10 - 30 HP – ABERTURA 70” X 70” APROX – WEIMA
PARTE: 12373 – ASTILLADORA – 10 -
30 HP – ABERTURA 70” X 70” APROX – WEIMA
Usada - Buenas condiciones230/460/6/3 electrics
LOW-RPM
AMXmachinery
ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
PARTE:
2EB-JMA-8 - ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
NUEVA CON GARANTIAFeatures include:Reversible KnivesAdjustable BedbladeSafety Bar - to disengage the Feed RollerRotating Exit ChuteSpecifications include:Chips 8" wood, with Opening size of 8"X8"PTO Driven at 540 RPMFeed Rate is 36 Feet per minute185Lb Flywheel, with Total Weight of approx 850 LbsRecommended for 18-45 HP tractors
Some
basic assembly is required.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - EXTRA HEAVY DUTY - 118 LITROS
PARTE:
2PG-IGUANA - HORNO PARA CERAMICA, VIDRIO, METALES - EXTRA HEAVY DUTY - 118
LITROS240V, 1 Fase, 10,800 Watts, 45 AmpsMedidas interiores: 457 mm ancho x 457 mm fondo x 457 mm altoVolumen interior: 118.93 litrosMax. Temperatura: 1287 grados centígradosNuevo con garantíaPowered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interio...
AMXmachinery
PARTE: 12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623
PARTE:
12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623USADA - BUENAS
CONDICIONESVoltage: 550/3/60CSA Hydro approvedHead Sequence: Bottom, Right Side, Near Side, 1st
Top, 2nd Top, 2nd Bottom9 1/16” x 6” CapacityInfeed Straightening Table -Sound EnclosureTotal H.P. 95.75 - Largest H.P. 20Total Amperage 107.2
40 mm Dia Spindles