ID: 1335
Open
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Description
PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
CONTORNEADORA BALESTRINI CP-4
PARTE # 11544 - CONTORNEADORA - BALESTRINI - CP-4EN BUENAS CONDICIONES DE OPERACION2 TROMPOS Y 2 PULIDORESMEDIDAS TOTALES: 5.80 MTS LARGO X 3.30 MTS ANCHO X 2.00 MTS ALTO5 MOTORES 380V, 3 FASES, 50 HZZ (2 MOTORES DE 7.5 HP, 2 MOTORES DE 4.5 HP Y 1 MOTOR DE 5.5 HP)VIDEOS DE LA MAQUINA FUNCIONANDO DISPONIBLES
AMXmachinery
PARTE: 1SL-DC-LBD69 - LIJADORA DE BANDA Y DISCO
PARTE: 1SL-DC-LBD69 - LIJADORA DE BANDA Y DISCONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 Hz, 1 FASEDIMENSIONES DE LA MESA: 6-1/4" X 12"DIAMETRO DEL DISCO LIJADOR: 9"DIMENSIONES DE LA BANDA LIJA: 6" X 48"PESO: 51 KGSEMPAQUE: 1 CAJA
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 3QD-MB5013DS - MOLDURADORA 5 CABEZALES - 20-130 MM ANCHOPARTE # 3QDMB5016DS - MOLDURADORA 5 CABEZALES - 20-160 MM ANCHOPARTE # 3QD-MB5018DS - MOLDURADORA 5 CABEZALES - 20-180 MM ANCHOPARTE # 3QD-MB5023DS - MOLDURADORA 5 CABEZALES - 20-230 MM ANCHOFEATURESModel3QD-MB5013DS3QD-MB5016DS3QD-MB5018DS3QD-MB5023DSPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6000rpm600...