ID: 216
Open
Description
PARTE # 1N-LIJ-020 - LIJADORA DE BANDA CON MESA MOVIBLE – MOTOR 5 HP, 220V, 3 FASES, MESA 31”X 102”
INDUSTRIAL PARA USO RUDO
LIJADORA DE BANDA CON MESA MOVIBLE
DIMENSIONES MESA: 31" X 102-3/8"
CURSO HORIZONTAL DE LA MESA: 31-1/2"
DIAMETRO DE LAS POLEAS: 12"
ANCHO DE LAS POLEAS: 6-1/2"
LOGITUD DE LA LIJA: 7.20 MTS
VELOCIDAD DE LA LIJA: 1100 MTS/MIN
DISTANCIA ENTRE CENTROS POLEAS: 3,100MM
ROTACION POLEAS: 1150 RPM
MOTOR: 5 HP, 220V, 3 FASES
MOTORES OPCIONALES 110/220V, 1 FASE
MEDIDAS MAQUINA: 300 CM LARGO X 200 CM ANCHO X 160 CM ALTO
PESO: 500 KGS
VIDEO DE LA MAQUINA FUNCIONANDO:
Video1: https://vimeo.com/638851755
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PROFILE KNIFE GRINDER
PART: 2TA-TG-9330-E - PROFILE KNIFE GRINDER
NEW WITH WARRANTYFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grinding center is never c...
AMXmachinery
PARTE: 12199 - PRENSA FRIA – OMC
PARTE: 12199 - PRENSA FRIA – OMC
USADA – BUENAS CONDICIONESCold press 1300mm x 2500mm Brand OMC MachineryMod: PL-90It can be used for doors or plain surfaces.
Manufacture
year 2002220 Volts
Infeed and out feed band
6 hidraulic pistons 4” width
AMXmachinery
ASTILLADORA ESTACIONARIA – 30 HP – WEIMA
PARTE: 12271 – ASTILLADORA ESTACIONARIA – 30 HP –
WEIMA
USADA – MUY BUENAS CONDICIONES
Rotor Dia.: 9.9″
Rotor Width: 31.5″
Rotor Speed: 60-100 RPM
Motor: 30 HP
Screen : 10-40mm
Model: WL6
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)