Identificador: 226
Abierta
.png)
.png)
Descripción
PARTE # 2AM-360 - LIJADORA DE CANTOS
Motor: 1.5 HP Direct Driven
Voltage:
361: 115 or 208-240/1/50-60
362: 208-240/1 or 3/50-60
364: 460/3/50-60
Variable Speed: AC Inverter 400-1800 rpm
Arbor: 1” Dia. by 4” Tall
Vertical Adjustment: YES
Horizontal Adjustment: YES
Wheel Tilt: 60o Forward; 40o Back
Fence: Standard
Table Height: 36 inches
Table Size: 36” by 33”
Floor Space: 33” by 33”
Weight: 375 lbs.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENLAZADORA DE CAJONES - DODDS
PARTE:
12369 - ENLAZADORA DE CAJONES - DODDS
MUY BUENAS CONDICIONES -
COMO NUEVABrand: DoddsModel: SE-1-25AFCondition: Very GoodYear: 2019Voltage: 220/1/Condition: Very GoodWith automatic feed of the cutter for dovetailing standard
English dovetails on one or two inch centerlines.Servomotors control the automatic feed with the consistency
and reliability of servo components.Simple operationSpindle movement controlled by servomotors.Touch screen operator interface.Servo controls for co...
AMXmachinery
PRENSA CALIENTE – 5 SECCIONES – 160 TON
PARTE: 3UD-HP48X160T-5 –
PRENSA CALIENTE – 5 SECCIONES – 160 TON – AMX MACHINERY
Nueva con garantía
$ 34,500 USD IVA – Flete incluido a las principales
ciudades de México – 26 Mar 2020
Maximum
pressure 160T
Number
of working layers 5
Number
and specifications of plates 6-42 x 2500 x 1300mm
Spacing
of hot press plate 100mm
Oil
cylinder 100 x 10pcs
Hydraulic
motor power 5.5kw
Heat
pump power 2.2kw
Heating
pipe power 60kw
Dimensions
3500 x...
AMXmachinery
PARTE: 3FM-FJS-001 – SISTEMA FINGER JOINT – SEMIAUTOMATICO
PARTE: 3FM-FJS-001 – SISTEMA FINGER JOINT – SEMIAUTOMATICOIncluye:Trompo- Motor Figer 10 HP- Motor Escuadra 5 HP- Motor Mesa 2 HP- Dimensiones empacada: 2060x1150x1500 mmEnsambladora- Area de trabajo 4600mm largo x 150mm ancho x 75mm alto- Motor Cortador 5 HP- Motor Alimentador 1/2 HP- Motor Bomba Hidraulica 5 HP- Dimensiones empacada: 6000x750x1640 mm
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...