Identificador: 82
Abierta
Descripción
PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010
Laminate Slitter, 6" capacity
- 110 Volt, 1 Ph., 1/3 HP,
Standard Features:
- 6" capacity
- 70 feet per minute
- 3-blade system for inlay quality cuts
- Self-aligning fence
- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” high
Optional:
- 220 Volt 50 Hz (export)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”New with warrantyMass production for wooden board, 2 to 3 minute for drying a 4' x 8' wooden boardAutomatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of wo...
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 400 MM ANCHO X 250 MM ALTO
PARTE:
3HP-HP-400PB - REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 400 MM ANCHO X 250 MM
ALTO
Nueva con garantía – Uso Rudo
Specification
1.With digital readout
2.Max. working size: 400mm(W) x 250mm(H)
3.Distance from blade to conveyor Table: 3-250mm
4.Conveyor belt size: 385mm(W) x 5470mm(L)
5.Saw wheel dimension: Φ28" x
2"(Thickness)
6.Max. infeed speed: 16M/min OPTIONAL: 25M/min.
7.Saw wheel motor: 30HP
8.Hydraulic pressure: 50-55kgs/cm2
9.Dust hood d...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
-500x500.jpg)
AMXmachinery
ESPIGADORA DOBLE DE CADENA - (2) MAQUINAS - CAP. 54” ANCHO Y 110” LARGO
PARTE: 11754 - ESPIGADORA DOBLE DE CADENA - (2)
MAQUINAS - CAP. 54” ANCHO Y 110” LARGO
4 - SIERRAS DOBLES. SIERRAS MARCA IND. G.H. PARA
ESCUADRAR MATERIAL HASTA DE 54” DE ANCHO Y 110” DE LARGO, QUIPADA CON 4 SIERRAS
DE 60 DIENTES EN 1/16 DE GROSOR ACCIONADA POR UNA BANDA, ROLES Y MICRO PARA
DIMENSIONAR Y CORTAR.