Identificador: 79
Abierta
Descripción
PARTE # EV-0257 – PICH ROLLER 62” - RODILLOS PLANOS - EVANS 0257
Pinch Roller 62" capacity
Solid top and bottom rollers for flat panel laminating
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Work Height: 30-1/2”
(Optional Riser Available)
Drive Motor: ½ HP
Electrical: 120 V, 1 PH, 60 Hz (Options Available)
Air Requirement: 100 PSI
Crated weight 790 LBS. Shipping dimensions 85” long X 33” wide X 57” high
Options:
Variable speed control 0-50, ½ HP DC motor #01667
Custom Riser Base
220 volt 1 phase 50hz
Up to 4” roll opening
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA
TABLAS Y PISOS – 40-300 MM ANCHO
Nuevo con garantía
Specification:
1.Max.
/ Min. Width: 300mm / 40mm 2.Max.
/ Min. Thickness: 10mm / 35mm 3.Min.
Board Length: 270mm 4.Max.
Board Length: Unlimited 5.Max.
Board Weight: 15kgs 6.Cutterhead
Spindle Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2) 7.Feeding
Pressure Roller Motor: 1HP W/1HP Inverter 8.Infeed
Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1H...
AMXmachinery
PARTE: 2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
PARTE:
2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
NUEVA CON
GARANTIA
Standard
Features:
Abrasive
belt size: 40” x 75”
Motorized
Table Lift
Variable
Speed Conveyor, inverter drive
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust
the tracking system when running extremely out of parallel belts
Heavy Duty
JackscrewTable Sup...
AMXmachinery
COLECTOR ASERRIN 75 HP
PARTE # 12006 – COLECTOR DE ASERRIN EXTERIOR – 26,440 CFM – MOTOR 75 HP – DIXIEModelo: SPB-202-10Capacity 26,440 CFMBlower motor: 75HPRotary air lock Dixie #14Equipped with 202 bags 10' longSupplied with motor startersSteel Structure to Support Above CollectorNew in 2000Year Manufactured: 2000
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBAPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADOPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOSNueva con garantiaDesigned for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.The brush, flap whee...