ID: 1630
Open
.jpg)
Description
PARTE: 1AM - EXTRACTOR TUBOAXIAL DIRECTO
Carcaza de acero al carbón, pintada con pintura electrostática y horneada. Aspa de aluminio anti-chispa. Accionado por acoplamiento directo a un motor eléctrico.
Características:
– Diámetro de aspa desde 16″ hasta 26″.
– Motores en voltaje 127/220V. y 220/440V.
– Volúmenes de aire: 4,200 hasta 18,725 PCM. Presión desde 0.2″ hasta 2.5″ columna de agua.
Usos:
Procesos comerciales e industriales, torres de enfriamiento, extracción de humo, gases en estacionamientos, viveros, etc.
|
Modelo
|
Potencia
HP |
Volumen
PCM MC/HR |
|
|
XTAD-16 |
1/2 |
4,200 |
7,136 |
|
XTAD-20 |
3/4 |
8,170 |
13,880 |
|
XTAD-24 |
1 1/2 |
14,530 |
24,686 |
|
XRAD-26 |
2 |
18,725 |
31,814 |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
SIERRA CINTA - VERTICAL 2 EN 1
PARTE: 2CK-HB950AIs a heavy duty 37” bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also be ideal for cut...