Identificador: 1750
Abierta
Descripción
PARTE: 2CK-PCM120
- Power stroke of head permits easy, fast and accurate successive cuts.
- Separate fan blower to keep work clean and free from dust and chips.
- Manual adjustable table height and lateral position
- Heavy duty cast iron construction.
- Convenient centralized control panel
- Foot pedal actuated cycle.
- Pneumatic workpiece clamping by lever
|
Chisel range |
1/4″~3/4″ |
|
Motor |
2HP |
|
Spindle speed |
3400 RPM |
|
Table |
16-3/4″ x 21-1/4″ |
|
Table tilts |
30o |
|
Air pressure |
8KG |
|
Clamping cylinder |
2.5” (63mm) |
|
Head traveling cylinder |
3.15” (80mm) |
|
Table cross travel |
5” |
|
Table longitudinal travel |
18” |
|
Table vertical travel |
12” |
|
Max. stock width |
12” |
|
Max. mortising depth |
4” |
|
Machine weight |
572 lbs |
|
Shipping weight |
726 lbs |
|
Shipping dimension |
35” x 38” x 70” (880x960x1780mm) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...
AMXmachinery1
SIERRA DE VAIVEN - 200 MM
PARTE: 2CK-FR-200 - SIERRA DE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
200 mm
Min.
Working Thickness
...
AMXmachinery1
DOBLADORA DE METAL
DOBLADORA DE METAL Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
Model
18
24
30
Maximum capacity,
mild steel
20 ga / 1,0
mm...