Identificador: 1867
Abierta
Descripción
PARTE: 12369 - ENLAZADORA DE CAJONES - DODDS
MUY BUENAS CONDICIONES - COMO NUEVA
Brand: Dodds
Model: SE-1-25AF
Condition: Very Good
Year: 2019
Voltage: 220/1/
Condition: Very Good
With automatic feed of the cutter for dovetailing standard English dovetails on one or two inch centerlines.
Servomotors control the automatic feed with the consistency and reliability of servo components.
Simple operation
Spindle movement controlled by servomotors.
Touch screen operator interface.
Servo controls for consistency.
Independent pneumatic clamping.
High frequency spindle motor.
Tool comp. for resharpened cutters.
25” capacity.
Dust guard w/ 2” outlet.
Chipbreakers.
Number of spindles: 1 -HP: 3 -RPM: 24,000
Pneumatics: 70 psi minimum
Dust Collection: 2”
Outlet -Electrical: 220V, 1 phase 25 Amps
Size: 54”W x 21”D x 51”H
Weight: 602 lbs.
Drawer Height: 1-1/2” - 25”
Material Thickness: Drawer fronts, backs 3/8" - 2"; Drawer sides 3/8" - 3/4"
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-PJ3 - GATO PARA TARIMAS - CAPACIDAD 3 TONS
PARTE: 1SL-DC-PJ3 - GATO PARA
TARIMAS - CAPACIDAD 3 TONSNUEVO CON GARANTIA
AMXmachinery
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 3 NIVELES
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 3 NIVELESHornos Secadores para Chapa Natural de MaderasNueva con garantíaOperación- Manual- Semi Automático- Completamente AutomáticoLínea Secado Horizontal- Características- Horizontal air circulation with vertical air blowing- Variable Frecuency DriveLínea de Sacado Vertical- Características - Vertical design - Energy saving - Small space - Economic Price - Less labor cost - High drying efficiency - Low operational costsFuentes ...
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...
AMXmachinery
PEGADORA DE TABLEROS – 6 SECCIONES – TAYLOR
PARTE: 12118 – PEGADORA DE TABLEROS – 6 SECCIONES – TAYLORUSADA – EN BUENAS CONDICIONES6 SECCIONES, 36 PRENSAS EN TOTALPRENSAS 36” LARGOMANUAL, NO ELECTRICALA ENGOMADORA EN LA FOTO NO ESTA INCLUIDA