Identificador: 2586
Abierta
.PNG)
Descripción
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NC
- Meet OSHA and CE safety standard
- 48” NC table back gauge with fingers
- Max. 16 bends per program
- Upto 100 Program Storage
- Programmable Angle/ Angle Correct
- NC ram height control for open hemming
- Hardened fingers and table
- Germany Rexroth hydraulic system
- Yaskawa Servo motors and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
Capacity: Mild Steel(hot roll)60K PSI Stainless Steel 85 K PSI Soft aluminum 28K PSI Hemming max thickness: |
10 Ga. 14 Ga. 1/4" 22 Ga. |
| Bending length capacity | 10' |
| Bend Angel Degree, programmable | 135 degree |
| Max. Box Depth | 153mm=6.02” |
| Large Beam Opening/Clamping Opening | 3" |
| Beam front/back adjustment | 1" |
| Min. Reverse Bend | 1" |
Max. Table Back Gauge Distance Min. Table Back Gauge Distance | 48-3/8" 1/4" |
| Back Gauge Repeatability | 0.0039" |
| Back Gauge Table Height | 35-3/4" |
| Assorted fingers | 3" 4" 5" 6" |
Main Motor
Servo Motor for back gauge |
10HP,220V/208V, 3ph (35amps)
1HP |
Hydraulic Oil Tank Capacity: Recommended hydraulic oil: | 32 Gal. Shell #68 or equivalent |
Machine Weight: Shipping weight: Machine Dimensions: Shipping Dimensions: | 11,550 lbs. 11,850 lbs. 175" x 93" x 76" 163" x 85" x 78" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 PULGADAS
PARTE: 2TA-WG-2502H - ASTILLADORA - HORIZONTAL - 24 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-0610MD6 foot hydraulic metal shears can cut up to 10 gauge by 72” wide mild steel sheet metal. A hardened shearing blade is installed and pre-gapped ready for buyers to operate upon arrival. Our light duty hydraulic shears are dependable and deliver sharp razor cuts with ease.Taiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke ...
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...
AMXmachinery1
DOBLADORA DE METAL
DOBLADORA DE METAL Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
Model
18
24
30
Maximum capacity,
mild steel
20 ga / 1,0
mm...