Identificador: 196
Abierta
Descripción
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
SIERRA ESCUADRADORA 3000 MM
PARTE # 1N-SBO-010 - SIERRA ESCUADRADORA - 3000 MMCAPACIDAD 3 MTS DE LARGOMOTOR 5 HP, 220V, 3 FASES
AMXmachinery
PARTE: 12647 - SIERRA OPTIMIZADORA - WEINIG / DIMTER - OPTICUT 450
PARTE: 12647 - SIERRA OPTIMIZADORA
- WEINIG / DIMTER - OPTICUT 450
Usada - Buenas condiciones
Capacidad ancho: 12”
Mas información próximamente
AMXmachinery
PARTE: AMX-10122 - TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: AMX-10122 - TRITURADORA - ORILLAS CHAPA, PAPEL,
CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
USADA - MUY BUENAS CONDICIONESPara papel, cartón corrugado y fibras pesadasMotor 2 HP, 208 - 230/460V, 60 HZ, 3 FASES - 1750 RPM - Marca BALDORMeiddas maquina: 25" ancho x 23" fondo x 29" alto - peso aprox. 161 kg (355 lbs)Medida maquina ya en tarima: 40" ancho x 33" fondo x 34" alto - peso aprox. 170 kg (370 lbs)===============================================================CATALOG...