ID: 196
Open
Description
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - EVOLUTION - CAP. 169” X 66” X 3-1/8”
PARTE: 2ST-EVOLUTION - SIERRA
ESCUADRADORA VERTICAL - EVOLUTION - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
EVOLUTION
Same Features as Standard S, plus:
- Full-wood back support - great for thin
material, narrow strips and added dust control
- Digital measuring in both X&Y axes with
fine adjustment (auto in Y)
- 12” touchscreen and industrial PC for
electronic control of saw head pivoting, plunging & locking
- Automatic locking of saw beam at vertical
cutting...
AMXmachinery
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHO
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHONUEVO CON GARANTIAMOTOR: 1.5 HP, 220V, 60 Hz, MONOFASICOTAMANO DE LA MESA: 18" X 14"CAPACIDAD DE CORTE: 13" X 6"MAX. PROFUNDIDAD DE CORTE: * 1/8" PARA TABLAS HASTA 5-1/2"13" * 1/16" PARA TABLAS MAYORES A 5-1/2"VELOCIDAD DE CABEZAL: 5000 RPMVELOCIDAD DE ALIMENTACION MOLDURADOR: 12 PIES/MINCAPACIDAD DE ANCHO EN MOLDURADOR: 2-1/2" A 6"DIMENSIONES MAQUINA: 44" ALTO X 24" ANCHO X 36" FONDOPESO: 120 KGSTIPO DE EMPAQUE: 2 CAJAS* L...
AMXmachinery
REASERRADORA 1 SIERRA 12"
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...