Identificador: 1982
Abierta
Descripción
PARTE: 12394 - ENCHAPADORA DE CANTOS - HOLZ-HER SPRINT
USADA - BUENAS CONDICIONES
SPECIFICATIONS
Model 1321
Year: 2007
Made In Austria
Condition Used
ELECTRICAL
Voltage 230 volts
Phase 3-phase
Fully loaded model with:
Pre-milling
Rough/fine/end trimming
3 mm round over
cartridge or pellet glue
Scrapers
Buffers
Operating Pressure: 6 bar
Limit Pressure: 8 bar
With CNC System
Running Hours: 4114 hrs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CONVERTIDOR DE FASES – 2 FASES 220V A 3 FASES 220V
PARTE:
1SR-000 - CONVERTIDOR DE FASES – 2 FASES 220V A 3 FASES 220V
USADOS – MUY BUENAS CONDICIONES
CAPACIDADES:
2
HP
3
HP
5
HP
7.5
HP
10
HP
15 HP
20 HP
30
HP
40
HP
50
HP
60
HP
75
HP
100
HP
ETC
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
BRIQUETEADORA PARA METAL - HORIZONTAL - HYDRAULICA - 30 HP
PARTE: 12377 - BRIQUETEADORA PARA
METAL - HORIZONTAL - HYDRAULICA - 30 HP
USADA - BUENAS CONDICIONES30
HP Motor10lb
Average Bale (Aluminum)30lb
Average Bale (Steel Chips)38lb
Average Bale (Copper)36
Second Cycle Time (100/hr) -Excl. – HopperVickers
Hydraulic Pump8”
Bore (Main Cylinder)9”
Bore (2nd Compression)4”
Bore (Cover)Approximate
Dimensions: 105” W x 60” H x 186” L (Machine Only)
Approximate Weight: 18,000 lbs.
AMXmachinery
ROUTER CNC - MODEL R - 15" X 20"
PARTE: 2TA-R-1520 – ROUTER CNC – MESA 15”X 20”3 Axis table top machine easily to do cutting, engraving, routing and etching for signs, sample or small production at the material such as wood, plastic, acrylic, plexi-glass, corian....User friendly iPicture software transfers the images, picture file to 3D cutting program with in a second at superior performance.Optional CAD/CAM system can create and edit part programs then send to machine for cutting. DXF files can be imported, modified a...