ID: 890
Open
Description
PARTE # 10402 - ENCHAPADORA DE CANTOS CEHISA EP7
Modelo: 2002
Motores: 220V, 3 fases
Medidas totales de la maquina: alto 1.20 mts x largo 2.80 mts x fondo 0.80 mts
En muy buenas condiciones
Tiene todos sus mantenimientos
Ya lista para envio en su tarima
Estacion pulidora externa incluida
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12424 - GUILLOTINA TESTERA
PARTE: 12424 - GUILLOTINA
TESTERA
USADA – BUENAS CONDICIONESMarca JoypeMod. 850Ancho útil de corte
85cm.Año de fabricación 1990Incluye 1 navaja
Apertura de trabajo es
de 10cm
AMXmachinery
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
USADO - BUENAS CONDICIONES
MOTOR 7.5 HP, 208-230/460V, 3
FASES, 3450 RPM, BALDOR
ENTRADA REDONDA: 8.5”
SALIDA RECTANGULAR: 4” X 8”
MEDIDAS TOTALES: 23” ANCHO X 21”
FONDO X 21” ALTO
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...