Identificador: 929
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 12030 – ENCHAPADORA CEHISA - EP-8
Usada – Buenas condiciones
Model: EP-8
Serial #: 2807
Approx. Shipping Weight: 2,500 Lbs.
Approx. Shipping Dimensions: 132″ L x 60″ W x 72″ H
Specifications:
Edgeband Thickness Max.: 3/16″ Solid Wood
Coil Cutoff Max.: 2.5mm PVC
Panel Length Min.: 5″
Panel Width Min.: 3″
Panel Thickness Min.: 3/8″
Panel Thickness Max.: 2″
Feed Speed: 33 FPM
Feed Motor: 1HP
Pressure Section: 1 Motorized Roller
End Trim Unit: 1/3HP
Tooling Speed: 12000 RPM
Straight Cut Max.: 3/16″ x 2-1/4″
Top & Bottom Trim Station: 3/4HP
Tilting Range: 0 – 20å¡
Machine Length: 10.5′
Machine Width: 56″ to 80″ (Depending on outrigger position)
Working Height: 32-1/2″
Total Height: 57″
Electrical: 220V/3PH
Equipped With:
Pressure Roller, Automatic Roll Cutter & Strip Feed Magazine, Standard Guillotine, Quickmelt Glue Pot, End Trim Unit, Top & Bottom Trim Unit, Top & Bottom Buffing Station
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
GUILLOTINA CHAPA 2 NAVAJAS
PARTE # 3NN-CUTMATE3400D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 3400 MMPARTE # 3NN-CUTMATE2800D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 2800 MMSpecificationModelCutMate 3400DCutMate 2800DCutting Length3400 mm2800 mmDaylight Opening80 mm80 mmElectric Powerapprox. 11 kwapprox. 11 kwCutting Width30 ~ 470 mm30 ~ 470 mmDimensions of Guillotine (L x W x H)5100 x 1800 x 2000 mm4500 x 1800 x 2000 mmDimensions of Hydraulic Tank (L x W x H)1150 x 550 x 1100 mm1150 x 550 x 1100 mmNet Weight (with Hydr...
AMXmachinery
LIJADORA DE TAMBOR 25"
PARTE # 2SM-913002 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 1 FASEPARTE # 2SM-913102 - LIJADORA DE 2 TAMBORES – 25” DE ANCHO – 5 HP, 220V, 3 FASESSPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537...
AMXmachinery
PARTE: 4RI-UNIX2200 - TALADRO PARA TAQUETES / PERNOS - RILESA - UNIX 2200
PARTE:
4RI-UNIX2200 - TALADRO PARA TAQUETES / PERNOS - RILESA - UNIX 2200
NUEVO CON GARANTIARiIesa
Unix 2200 Drilling machine $ 115,790 eurosTools
are not included, are to be purchased separatelyOur
flexible dowel drilling machine. – With a large range of special equipmentDescription:•
Drilling from 4 sides: top, right, left, back•
Capacity up to 14 pcs/min•
Set-up help using light beam•
Vertical magazine•
One-man operated Extra:•
Side movement•
Small millings•
...
AMXmachinery
PLANOS SECANTE MADERA
PARTE: AMX-PLANO-010- PLANOS SECANTE DE MADERA ASERRADA - 8,000 PT Construyalo usted mismo.Enviamos por email 1 archivo PDF con 15 a 20 hojas con fotos, planos, características, lista de materiales e instrucciones del secante de 8,000 pies tabla.Características del secante:Es secante e inmunizador.Desarmable.Se puede construir en diferentes capacidades.Utilizan como combustible: aserrín, recorte, capote o lena.El secante con los ahorros se paga de 2 a 3 anos aproximadamente.Despeja su patio ...