Identificador: 1981
Abierta
Descripción
DOBLADORA DE METAL
Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
|
Model |
18 |
24 |
30 |
|
Maximum capacity, mild steel |
20 ga / 1,0 mm |
20 ga / 1,0 mm |
20 ga / 1,0 mm |
|
Maximum Bending |
18 in / 457 mm |
24 in / 610 mm |
30 in / 762 mm |
|
Depth of drive cleat |
1/2 in / 12.7 mm |
1/2 in / 12.7 mm |
1/2 in / 12.7 mm |
|
Dimensions, handles removed LxWxH |
25-1/2 x 12-1/2 x 12-1/2 in 648 x 317.5 x 317.5 mm |
32 x 10 x 11 in 813 x 254 x 280 mm |
38 x 10 x 11-1/2 in 965 x 254 x 292 mm |
|
Shipping Weight |
63 lbs / 29 kg |
95 lbs / 44 kg |
150 lbs / 59 kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL
AMXmachinery1
SIERRA ESCUADRADORA - 5 PIES
PARTE: 2CK-P30Is the ideal solution for customers looking for the precision and convenience of a sliding table saw but have limited floor space and smaller cutting requirements. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (¾ HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displa...
AMXmachinery1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...