Identificador: 2600
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
DOBLADORA DE METAL 5' X 10GA PARTE: 2GM-0510E
Capacity: Mild Steel Stainless Steel soft aluminum min. thickness |
5'1" x 10Ga. 5'1" x14Ga. 5'1" x 1/4" 26Ga
|
| |
| Roll Dia. | 4 3/4" |
| Min. Bending Dia. Inch | 6" |
| Pre-bend inch | 0.12" |
| Rolls Speed ft/min | 20 |
| Rolls Opening | 1/2" |
| Main Motor | 3HP 3PH 220V or 440V |
| Weight | 3,050 lbs. |
| Overal Dimensions | 96" x 32" x 52" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
ENDMATCHER MACHINE
ENDMATCHER MACHINE PARTE: 2CK-EM12Is specially designed for machining tongue and groove (with or without bevels) on hardwood flooring and wall/ceiling paneling up to 12” wide. Its compact design with continuous through feed system allows for maximum output in a small space. Equipped with a user-friendly touch screen interface allow for simple operation with excellent performance and error diagnostics. The dual counter-rotating cutterheads produce bot...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES
CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES PARTE: 2GM-HBB-0410Our 4 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesISO 90...